Fuses defend your vehicle’s electrical system native overloading. If electrical parts in your vehicle are not working, the mechanism may have actually been overloaded and also blown a fuse. Prior to you replace or repair any kind of electrical parts, examine the ideal fuses.
You are watching: 1994 ford ranger relay box diagram
The adhering to charts tell girlfriend which fuses protect each electrical part of your vehicle. If a fuse blows, all the parts of your car that use that circuit will certainly not work.
Once girlfriend have figured out which fuses come check, follow the measures under Checking and Replacing Fuses more down this page.
Passenger Compartment Fuse Panel
The passenger compartment fuse panel is located on the vehicle drivers side (end) of the dash board.
Engine Compartment Fuse Panel:
Not every one of your fuses are in the dashboard under the dash. There is additionally a fuse panel (power circulation box) in the engine compartment on the motorists side of the vehicle.
Checking and also Replacing Fuses
If you require to examine a fuse, follow this steps:
1. Find the fuse panel, i m sorry is located in the left end of the instrument panel. The power distribution box (described previously in this section) is found in the engine compartment, mounted on a parentheses attached to the motorists side fender apron.
To access the fuse panel, remove the fuse dashboard cover by inserting your finger in the divot and pulling top top the cover. The underside that the cover includes four spare fuses. A fuse pulling device is situated in the lower right edge of the fuse panel in instance you should replace a blown fuse.
Color Coded: The preventive fuses because that your vehicle are color coded as follows:
10 amp — red15 amp — light blue20 amp — natural30 amp — light green.See more down ~ above this page for examples
2. On the fuse dashboard cover, find the number of the fuse you want to check. The diagram on the cover tells you where tolocate the fuse ~ above the panel.
3. Inspect the fuse to watch if that is blown. Look v the clear next of the fuse to view if the metal wire inside is separated. If the is, the fuse is blown and also should it is in replaced.
Another technique for testing fuses is to usage a Bussmann fuse tester. There’s no need to remove the fuse native the holder. Girlfriend simply adjust the prong width on the tester to line up with the bare steel spots on the end of the fuse, and also then watch for the indicator irradiate to glow signaling that the fuse is good.
4. Replace the fuse v one that has the ideal amperage rating
*WARNING always replace a fuse through one that has the mentioned amperage rating. Making use of a fuse through a greater amperage rating can cause severe wire damage and also could begin a fire.
5. Put the fuse panel cover back on.
Even ~ you change a fuse, it will continue to punch if you carry out not uncover what resulted in the overload. If the fuse proceeds to blow, have actually your electric system checked.
See more: Hoops Walter Dean Myers Chapter Summaries Free Essays, Hoops Part 1
Fuse shade / Ratings:
As stated above, fuses are color coded to your AMP rating. See the image listed below for examples.