Changing your Jeep"s oil is a pretty simple job that anyone have the right to do at house in the driveway. Act it yourself not only saves girlfriend a couple of bucks, but gives you a opportunity to visually examine other points on her Jeep in ~ the same time. And when you execute it yourself, you deserve to rest easy understanding the job is excellent right and also with the specific parts or fluids of her choosing. Depending upon your Jeep, even if it is you"ve installed a lifted supsension or not, you might even be able to tackle this project without any jacks and also jack stands or driveway ramps. And is some cases you can also do this task without increasing your Jeep even if the suspension is fully stock. I"ll be using a lift, simply to make the task of taking pictures easier, but really all you require for this job is a couple of hand tools.

You are watching: 2004 jeep grand cherokee 4.7 oil capacity


What You will certainly Need


6 quarts of 5W-30 (Preferred) or 10W-30 (depending on the temperature selection anticipated prior to your next oil change) Ratchet13mm SocketOil Filter SocketDrain PanShop Towels / file Towels--- not crucial - but beneficial ---Rubber GlovesFunnel

Instructions


Before functioning on your Jeep, constantly park on a level surface, placed it in park and set the parking break. It"s always a great idea to chock the wheels to it is in extra safe whenever working under your Jeep.

Before beginning to change the oil, run the engine for a few minutes to warmth the engine oil. This will aid the oil circulation easier and quicker.

*

According come the owner"s manual, 5W-30 is the preferred oil for both the 4.7L and the 4.7L High calculation engines and is best for environmental operating temperatures below 100ºF. If you live in an area the sees external temperatures end 100ºF climate you need to use 10W-30.

*

1. Remove the oil filler cap to help allow all the oil to drain from the engine better.

*

2. Remove the oil filler baffle from inside the oil filler neck.

*

3. Using a 13mm socket, remove the drain bolt from the bottom that the oil pan.

*

4. Allow the oil to drain into a pan. Store some file towels near by to clean up any kind of spills or drips and to wipe off any oil that might splash onto your exhaust. ~ the oil has actually finished draining, change the drain bolt and also torque come 25 ft lbs. (Hand tightening functions perfectly fine because that the drain bolt if girlfriend don"t have a torque wrench.)

*

5. Using her oil filter wrench, remove the old oil filter.

*

The Mopar oil filter illustrates the measures for installation your brand-new oil filter.

*

6. Clean and inspect the oil filter sealing surface to be certain there"s no corrosion or debris that may cause a negative seal top top the brand-new filter.

*

7. Lubricate the seal ~ above your new oil filter v a couple of drops of clean engine oil.

*

8. Install the brand-new filter on to the engine block. Hand tighten the filter.

*

9. Using one oil filter wrench, tighten the filter 1 more revolution previous hand tight.

*

*

10. Using a funnel, refill the engine v oil. The 4.7L engine needs 6 Quarts that oil. If you"re making use of a 5 Quart jug, don"t forget to include one additional quart.

*

11. Clean off and re-install the oil filler baffle the you eliminated earlier.

*

12. Clean turn off the oil cap, climate lubricate the oil seal on the cap v a few drops of clean engine oil. This will help make removing your oil cap during your following oil change much easier.

See more: How To Catch The Mullet On Club Penguin ? How Do You Catch The Rare Mullet On Club Penguin

*

*

13. The overhead Electronic vehicle Information center or EVIC for quick keeps track of once it"s time to finish an oil change. Be certain to reset the business interval after ~ completing her oil change so you"ll it is in reminded when it"s time to change it again. Through the Jeep in park (the crucial can it is in in the on position with or there is no the engine running) press the STEP switch until the organization message shows up on screen. Then press and hold the RESET switch for a few seconds. The EVIC will certainly beep and also reset. The EVIC deserve to be programmed to different company intervals depending on your driving habits by making use of the MENU button when the Jeep is in park.