Recently had actually my uncle ~ above the talk mower and also he fight a branch that slid up into the infection belt. It gained lodged in between and also somehow popped the belt off. The belt got chewed up, and also in the procedure broke the plastic infection fan. I hate paying for people to deal with my stuff, for this reason I made decision to try it on mine own. That wasn"t as well bad, take it me around an hour, and also I didn"t have actually any significant problems.Tools you"ll need:Impact Wrench3/8" drive Socket Wrench w/ Socket Set1/2" Breaker BarPB Blaster


*
*

Step 1:Turn turn off the tractor (Duh), place the PTO bar to “OFF” position. Relocate the tractor come a level spot, through plenty of clearance top top both sides. Make sure the engine has completely cooled down, as you will have arms and also hands very close to parts that space hot. Eliminate the mowing deck indigenous beneath her tractor. Skip to step 2 if friend know how to do this.I carry out this by dropping the elevation down to 2 or 3. Over there is a handle on either side of the tractor through a black color rubber grip. You pull this out to disengage the deck. You’ll desire to support the deck with your hand, as it will drop down to the floor. After the deck is down, eliminate the front affiliation bar indigenous the former of the tractor. This simply requires taking the cotter pen out, and unscrewing the nut. Obtain a few plastic bowls or cup or every little thing you need to keep nuts and bolts in. Once this is removed, slide the deck to the “left” next of the tractor (Side without the levers). The PTO cable will still it is in attached. Eliminate the cotter pin and and traction the cable up and also out the the bracket. Detach the spring from the pulley and collection the whole cable assembly out of her way. I hooked the onto the chair spring. Normally, you deserve to just press the deck belt down and off the pulley, yet we have to remove the belt security anyway, so we deserve to do the now. Over there is (1) bolt and also (1) seed to eliminate the guard. (Get a bowl for those parts!)Push the belt forward and off the pulley. Currently the deck is completely detached. On slide it every the means out and also get it out of your way. Currently would it is in a good time to have actually one the your kids start clean it.

You are watching: Changing the drive belt on a cub cadet lt1045


Step 2:On a level surface, raise and block the tractor SAFELY! This is the most crucial step of this procedure, together you will certainly be using tools that will cause quite a little of vibration. I merely lifted the front axle of my mower ~ above a sturdy wood table. It provided me around 2 feet the clearance and a sturdy stand. You’ll need enough clearance to acquire your influence wrench and socket ~ above the engine sheave bolt.


*

Step 3:Get the affect wrench out and also I believe it to be a 16mm impact socket, focus on influence socket. Don’t use a constant socket, it may break sending shrapnel right into your body. Collection the socket ~ above the engine pulley and lay into that sucker, have your hand top top the pulley, together it will want to slide down. (Hopefully you have actually hit the point with PB blaster because that a couple of days.) note which direction the spacer ~ above the wheel faces. (Bowl for the parts!) If you forget i beg your pardon direction that faces, have a look at the picture.


*

Step 4:Take note of the path the belt takes before you remove it. To acquire the belt turn off of among the idler pulleys, you"ll need to remove a small bolt. (Bowl!)Remove the belt off of the pulleys, other than the infection pulley.


The infection pulley has actually a guard all the method around it. You have to remove the pulley and also lift it up, to clean the guard. I had to carry out this anyway, because the fan needed to it is in replaced. Due to the fact that my fan was obliterated, i locked ~ above the plastic with a pair of evil grips, then provided my 1/2” socket ~ above the pulley nut. This to be not simple removal. It just took 10 minutes, yet I busted quite a couple of knuckles. Really satisfying as soon as it ultimately moves though. Once you rest it free, background the pulley-block up and also remove the old belt.


Start the brand-new belt on the engine pulley. Course it over the steering gear towards the behind of the tractor. Install the engine pulley, and hand tighten the bolt.


*

Route the belt approximately the infection pulley and install the pulley and also fan back onto the transmission. You’ll have actually to set the parking brake / cruise manage lever to obtain some slack in the belt and run it roughly the idler pulleys.

See more: What Can Be Seen But Not Touched, You Can Look But Can'T Touch


Torque the nut on the transmission sheave down. Ns going to be honest, I have no idea what the talk spec is, so i just got it on there as tight as I could. I found one reference that stated the engine pulley bolt have to be in ~ 50lbs., however I’m no 100% sure about this. I simply made it very snug. You can remove the spark plug and also stick part rope in there if the sheave is slipping.


*

Step 9: Reinstall the tiny idler pulley-block bolt that was removed.Step 10: Reinstall the mower deck.Step 11: Reinstall the engine pulley-block guard.Step 12: walk mow the lawn!