My fan clutch was stuck so ns went and also bought one from the Zone. I provided the haynes manual. Well ns was doing what they said, organize the pulley bolt while using the special organization tool, loosen the fan clutch nut. Fine It didn't work and I tried forever. Any kind of ideas on how to acquire this off?


Pics below





Member 0240 postsLocation:Boston, MAGender:Male

If you need the pictures, i will require some time come e-mail them come you. This is the message version.

You are watching: Chevy s10 2.2 fan clutch removal


Good happy



Document ID# 179324

1998 Chevrolet/Geo S10 Pickup - 4WD





Fan Clutch Replacement

Removal Procedure

Tools Required

J 41240 fan Clutch Wrench


Remove the top fan shroud. Describe Fan Shroud replacement .



To preserve a well balanced fan assembly, align the yellow paint note on the fan clutch hub with the yellow paint mark on the water pump hub.







Remove the pan clutch indigenous the coolant pump making use of J 41240 .

Install J 41240-1 into the water pump accessibility holes.

With J 41240-2 secure on the fan clutch nut, hold J 41240-1 steady in place while transforming J 41240-2 counter-clockwise.

Remove the fan and the pan clutch as an assembly.




Remove the fan-to-fan clutch mounting screws (2.2L, RWD w/AC).




Remove the fan-to-fan clutch mounting screws (2.2L, RWD w/o AC).




Remove the fan-to-fan clutch mounting screws (4.3L w/AC).




Remove the fan-to-fan clutch mounting screws (4.3L w/o AC).

Remove the fan from the clutch.

Installation Procedure



Use the exactly fastener in the correct location. Replacement fasteners should be the correct part number for the application. Fasteners requiring replacement or fasteners inquiry the use of object locking compound or sealant are identified in the company procedure. Perform not use paints, lubricants, or corrosion inhibitors top top fasteners or fastener joint surfaces unless specified.

See more: What Is 17 Out Of 24 As A Percentage ? 17 Is What Percent Of 24

This coatings affect fastener torque and also joint clamping force and also may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order come avoid damages to parts and also systems.