Removing paint from steel isn’t difficult, yet it have the right to be tedious and also potentially dangerous. Thankfully, there are plenty of ways come strip paint from metal—including safe and eco-friendly ones—that will have your object looking as great as that did prior to someone chose to take a paintbrush to it. So, those the ideal paint remover for metal? A lot of it counts on the item. Consider the options below, before tackling your next project.

You are watching: How to remove paint from brass bed

Methods because that Removing repaint from Metal

Paint Scraper

*
Alamy This handheld tool, with a plastic or metal blade similar to a putty knife, deserve to remove paint with just a tiny elbow grease. If you room working through a softer metal like brass, pick a plastic blade over a steel one to make sure you don’t damage or scrape the metal’s surface. Scrapers come in assorted sizes; select one that’s comfortable come hold and also well-suited because that the project (a broad blade because that flatter, wider surfaces and also a narrower blade for smaller, harder-to-reach areas).

Ideal For: level surfaces and small jobs whereby the paint flakes and also comes off easily, there is no the require for chemicals.

Heat Gun

Heat guns “melt” the paint, resulting in it come pull away from the steel surface. Begin on the lowest setting and host the warmth gun a couple of inches away from the surface, moving it back and forth slightly. Warning: High heat have the right to warp metal. Start slowly and also avoid overheating the area. When the paint starts to balloon or traction up from the surface, scrape the off making use of a putty knife or repaint scraper. If the paint doesn’t bubble, gradually increase temperature till it does. Make certain to usage heat-resistant gloves and also do no touch the metal piece till it has thoroughly cooled.

Ideal For: Targeting tiny areas and also for jobs where you arrangement to job-related in little sections.

Angle Grinder v Strip Disk

A quick and also easy, albeit noisy and also dusty an approach is to connect a piece disk to her angle grinder and also let the handheld an equipment do the (dirty) work. Strip disks come in various abrasive materials, for this reason look for one the is designed to remove repaint from metal and won’t cause damage come the surface.

Ideal For: Stronger metal pieces like steel, beams, pipes, fences, metal furniture, and also larger, flat surfaces.

Baking Soda (or Vinegar) & Heat

A natural way to remove paint from steel surfaces is to integrate baking soda and water or white vinegar and water over a heat source. You have the right to do this on her stovetop v a disposable pot or pan. For every quart of water, include 1/4 cup the baking soda or vinegar and also bring the water come a boil. Include the item come the pan and also let it cook for around 15 minute or till the paint falls off. If wearing heat-protective gloves, usage tongs to remove the steel pieces. Scrape off any remaining paint with a putty knife or hard-bristle brush.

Ideal For: Smaller metal pieces choose hardware and also hinges.

Paint Stripper

Paint strippers come in various forms, consisting of a low-odor version made native soybeans, however the procedures are the same. To water the stripper right into a container and, making use of a chip brush, apply a thick layer to the object, allowing the chemical to react v the paint and also bubble (anywhere native 30 minutes to overnight). With a rag or scraper, wipe and also remove the liquid, in addition to the undesirable paint, repeating as necessary. Job-related in a well-ventilated area and remove any kind of potentially flammable items prior to using this method.

Ideal For: the end projects, big pieces, spray repaint on metal, and items with hard-to-reach nooks and also crannies.

Paint remove Tips

Avoid utilizing coarse sandpaper or wire-bristled brushes on metal; otherwise friend may damage or pit the surface.Old toothbrushes come in handy when attacking hard-to-reach corners or crevices.Follow the paint stripper’s instructions and also adhere come the recommended time of because that leaving the chemical on the painted metal—layers the stuck-on paint are tough to penetrate and also breaking through those bonds have the right to take time.After every the paint has actually been gotten rid of from the item, wipe down and clean the steel with mineral spirits and a clean rag.Dispose the the paint, any kind of chemicals, and materials properly.

See more: How Many Straight Men Who Like To Wear Pantyhose And Why? Some Men Have Taken To Wearing Pantyhose

Safety Tips and also Tools

When removing repaint from any kind of surface, rental the complying with safety measures:

Work in a well-ventilated area (outside, if possible) and remove all flammable objects as soon as working v a chemical paint stripper or edge grinder.

Tools You’ll should Remove repaint from Metal

Long sleevesDisposable containerClean rags